Overlining (and Underlining) a Fly Rod

best 5wt fly rod for trout

Overlining (and Underlining) a Fly Rod

“Overlining” a fly rod refers to the practice of using a fly line that is rated higher than the designation on your fly rod. Eg using a 6wt fly line on a fly rod designated as a ‘5wt’.

Underlining a fly rod is the reverse I.e using a 5wt fly line on a fly rod designated by the manufacturer as a ‘6wt’ fly rod.

This all gets a little sketchy these days because:

  1. There is no standard to label the intrinsic power of a fly rod. And many fly rod manufacturers produce fly rods that would normally be stiffer than would be a fair designation in their pursuit to sell “fast fly rods”. For some reason the perception is that faster is better and consumers go for this as being some sort of benefit.
  2. Many fly lines are over - and in some cases way over - the weight designation for fly line specifications. There is a standard specification for fly lines - not so for fly rods as outlined in our earlier article here:

It's important to know that overlining or underlining a fly rod will not change it’s intrinsic properties. It will, all things being equal, make it bend more or less for a given amount of line out the rod tip.

5 wt fly rod

Overlining a fly rod:

Why you might wish to overline your fly rod.

  • Casting short distances in windy conditions
  • Picking up and turning over very large flies
  • Lots of roll casting in confined spaces / no backcast room
  • Loading (Bending) the rod with a short amount of line out the tip
  • You have a stupidly stiff fly rod that the manufacture has underrated in order to make it feel “fast”

Keep in mind that many fly lines are now over the AFFTA recommended weight for the specification - so in many cases you are already casting an “over-lined” fly rod by default

Underlining a fly rod:

All things being equal - a lighter line will deflect / bend the rod less for a given amount of line out.

This can:

  • Result in tighter loops
  • Allow a longer carry
  • Give a more delicate presentation than a heavier line.

 Overlining fly rods

Over-lining a fly rod

If you look at the actual weight stated on fly line specifications above, you’ll see that many fly lines are  heavier than the highest limit of the specification.

The problem then is that unless you’re aware of that when you buy the fly line, you might be overlining a fly rod that is already effectively overlined.

The AFFTA system, is not perfect, but if line manufacturers kept their products in line with the standard specifications there would at least be a “standard” and all our lives would be made much easier. Then, you could adjust up or down for your rod type without having to double-check that the specifications of the line matched the standard.

Our Glassline fly lines  - produced for us by Scientific Anglers USA match the sweet spot for a given weight exactly. Epic Glassine  fly lines - True to weight fly lines 

Our fly rods are rated against the AFFTA standard for each line - and are, to the fullest extent possible - true to weigh. Epic Studio Built Fly Rods - True to Weight Fly Rods

More on this topic:

Fly Fishing: Fly Rod Ratings, Fly Line Weights and the Arms Race

How to choose the right fly line for your fly rod

Reading next

Specasting tips lessons
How to Build A Fly Rod Fly Rod Building Kit

Choose the right fly rod

Take our quick quiz and we'll find the perfect fly rod for you!

Find my perfect fly rod